Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Sending signals through concrete walls

  1. #1
    Junior Member
    Join Date
    Feb 2023
    Posts
    1

    Sending signals through concrete walls

    I am building a house with concrete walls. I know the limitation is 30 feet for Caseta - will concrete walls effect this. The other option is to go RA2 select with multiple repeaters

  2. #2
    Senior Member
    Join Date
    Mar 2017
    Posts
    113
    I have done a Ra2 job on a Caribbean Island where all the exterior and many of the interior walls were poured concrete. I was amazed and relieved that I had no issues, especially once I got there and found out the idiots had only run 3/4 PVC between buildings for the low voltage wiring. I did have to play around with aux. repeater locations.

  3. #3
    Lutron Technical Support
    Join Date
    Jan 2022
    Posts
    139
    Concrete walls can degrade the signal of RF communication, however Lutron specifies their RF signal range in a way to ensure that the RF range listed is accounting for use in the worst-case conditions. I would expect the Caséta hub to still be able to communicate with Caséta devices so long as they are within the 30 foot range of the smart hub.

Similar Threads

  1. Sending HTTP commands?
    By AVMagic in forum 3rd-party Integration - HWQS
    Replies: 12
    Last Post: 12-17-2023, 12:34 AM
  2. Transfer failure at step "Sending Link Command to Processor(s)"
    By GrooveSAN in forum Troubleshooting - HWQS
    Replies: 4
    Last Post: 12-14-2018, 08:14 AM
  3. Partition Walls
    By petewatters in forum Design Assistance - HWQS
    Replies: 2
    Last Post: 07-14-2018, 08:42 PM
  4. Replies: 1
    Last Post: 05-12-2016, 02:07 PM
  5. Homeworks QS Partition walls
    By jwbcinergy in forum Design Assistance - HWQS
    Replies: 1
    Last Post: 05-23-2014, 11:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •