Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Question about flicker without dimming

  1. #1
    Junior Member
    Join Date
    Feb 2023
    Posts
    1

    Question Question about flicker without dimming

    I am using a PD-6WCL-LA wallswitch with 4 "100W" LED bulbs. I am not using the dimming feature, running the lights at full brightness. They flicker. Not always, but a lot. What am I doing wrong? I understand if I were to dim them there might be issues, but full brightness? Thoughts please. Thanks!

  2. #2
    Lutron Technical Support
    Join Date
    May 2022
    Posts
    50
    Hello, if you are using a dimmer that load must be dimmable and compatible even if you do not plan on dimming them. A better option might be to use an on/off switch if the load is not dimmable. The light output would also be brighter than the dimmer at 100% brightness if it was put on a switch instead of a dimmer. You could also try lowering the high-end trim on the Caseta Dimmer so that at its full brightness there is no flicker.

Similar Threads

  1. Replies: 3
    Last Post: 06-18-2020, 10:59 PM
  2. PowPak® Dimming Module question
    By Radio777 in forum General Discussion - CAS
    Replies: 2
    Last Post: 05-13-2020, 02:08 PM
  3. Replies: 1
    Last Post: 02-13-2018, 07:13 PM
  4. Strange flicker issue
    By AndyWa in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 07-12-2017, 04:44 PM
  5. Dimming lights flicker Cree CR6 6" Downlight
    By cloney in forum Performance Issues - LED
    Replies: 3
    Last Post: 10-12-2016, 10:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •