PD-5ANS Won't work with 3-Way Toggle Switch

[Rich R]

I just replaced a conventional 3 way switch with the PD-5ANS and connected it to my smart-router. It works fine from both the switch and the iPhone app. However, the other 3 way toggle switch will only control the lites if I first turn them on from the Casetta. When i do this and go to the 3 way toggle, it will turn the lights on and off.

However, if I turn the lights off from the Caseta, the 3 way toggle switch has no effect at all. I followed the wiring diagram (i thought) but perhaps not. Before I start switching wires, I wanted to check with the forum. Attached is the wiring diagram i followed.

Any comments welcome!

Rich

[Spaztibator]

currently on the 3 way, 3 different screws are used? YOu have to combine the common (hot) with one of the other travelers. The video below works great to show what you need to do.

https://youtu.be/OQe5Ja0k7rA