Caseta with 2x 4-way switches

[Spaztibator]

I have a Caseta PD-5ANS-WH-R and 2 4-way switches. This would replace the 3 way switches I assume. The hot wire from the breaker panel goes to one of the 4 way switches. How do I go about wiring everything up? Is there a link to instructions out there that I can't find?

Thanks,
Chris

[Freddy G.]

Hello, what you are describing is a Multi-Location Application. The PD-5ANS cannot be used in this application with mechanical switches. You would need to replace 1 3-Way switch with the PD-5ANS, and the other locations would have their controls removed and replaced with a Pico Wallbox Adapter and Pico Remote. You can reference the Advanced Caseta Installation Guide for the wiring instructions and diagrams.