Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: LED 0-10V dimmer switch

  1. #1
    Junior Member
    Join Date
    Jan 2023
    Posts
    1

    LED 0-10V dimmer switch

    I bought a Lutron DVSTV-453PH dimmer switch for a LED strip light (Sylvania) which uses a low voltage wire for the dimmer. I ran the low voltage wires. The dimmer switch slide will only work at full brightness and midrange although it does not dim much at all. I can't find any info on compatible dimmer switches for this light. I tried the high and low trim on the switch but that does not help at all.
    Any help is appreciated.
    Slante

  2. #2
    Lutron Technical Support
    Join Date
    Jan 2021
    Posts
    127
    Do you have the model number of the strip lights you are using? With 0-10v dimming, you can short the low voltage wires (should be purple and gray or purple and pink) from the driver to force the lights to dim down as far as they can go. If you do this, do the lights dim down any further than with the DVSTV-453P?

Similar Threads

  1. Replies: 8
    Last Post: 04-23-2019, 11:24 AM
  2. Three way dimmer switch for one of three switches: which switch?
    By aaronp in forum General Discussion - Controls
    Replies: 5
    Last Post: 04-19-2019, 09:50 AM
  3. Caseta Dimmer 3-way circuit with remote dimmer or switch
    By Phred in forum Design Assistance - CAS
    Replies: 0
    Last Post: 12-01-2017, 12:58 PM
  4. Pico Dimmer Switch and Smart Switch in a multi-location setup
    By jbaude in forum General Discussion - CAS
    Replies: 1
    Last Post: 11-08-2017, 04:06 PM
  5. Double Switch with Dimmer / Non Dimmer Combination
    By HandyMatt in forum General Discussion - Controls
    Replies: 1
    Last Post: 06-08-2017, 09:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •