Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Maestro LED+ Full Brightness After Power Outage or Surge

  1. #1
    Junior Member
    Join Date
    Jan 2023
    Posts
    1

    Maestro LED+ Full Brightness After Power Outage or Surge

    I've got six of these dimmers installed in the house. If there is a power outage/surge one of them comes on at full brightness and cannot be used without completely resetting. Is just this one unit defective or is the programming screwed up?

  2. #2
    Lutron Technical Support
    Join Date
    Jan 2021
    Posts
    127
    Hi,

    Can you replicate this issue by turning the lights off then pulling the FASS (small tab below the tap button) then pushing the FASS back in? What kind of lights are you using? If you are using LED lights, what happens if you swap the lights out for an incandescent or halogen light? If swapping the lights fixes the issue, we would suggest using LED lights that we have compatibility testing with (found at Lutron.com/LEDFinder). If it does not resolve the issue, please contact our Technical Support team at 1-888-588-7661 or support@lutron.com.

Similar Threads

  1. GrafikRA RA-GRX-4 flashing after power surge
    By npross in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 06-05-2022, 10:36 AM
  2. Bulbs at full brightness at 30% Using Lamp Dimmer
    By krp87b in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 08-30-2021, 10:24 AM
  3. Maestro flashes on full power
    By JCEnergy in forum Troubleshooting - Controls
    Replies: 2
    Last Post: 02-04-2021, 04:57 PM
  4. LED flicker when dimmer at and near full brightness setting.
    By Grim Reaper in forum General Discussion - LED
    Replies: 1
    Last Post: 05-19-2019, 02:22 AM
  5. HWI-PM-d48-120 Power surge damage-
    By cartnj in forum Troubleshooting - Legacy HW
    Replies: 7
    Last Post: 04-04-2017, 10:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •