I just bought and installed the Lutron Maestro kit with companion dimmer for my foyer light. One switch for the top of the staircase and one for the bottom. when I hook everything up, the lights work for a few moments and then stop working. I continue to get the LED indicator on the master switch working but no light output from the foyer lights. The foyer lights are Cree 60 watt equilvalents that run 9.5 volts per bulb. There are 12 bulbs.
As for wiring, I have the companion at the top of the stairs where the lighting load is. The white is tied into the other white wires in the junction box, while the black is going to the black lug on the companion dimmer. This leaves me with the two carrier wires that go down to the bottom of the step (red and black). I put red to the blue lug and black to the gold lug, green to ground. The white wire that goes down to the master switch is live as it is tied in to the other black live wires in the junction. At the bottom of the step, I have the white (line) going to the black lug with the red carrier going to the blue nut and the black carrier going to gold nut, and green to ground.
Im hoping I missed something and someone can help. Sorry for the long post. I wanted to give as much detail as possible. Oh yeah. My bulbs are on the compatible list.
Thanks,
Dave