Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: RA 3 Keypad

  1. #1
    Junior Member
    Join Date
    Nov 2018

    RA 3 Keypad

    I want to use the RA 3 keypad, 3 button with up and down, as a "companion" dimmer switch controlling three separate loads. Each of these loads are switched with an RA 3 dimmer ( RRST-PRO-N). Space is tight and adding a 4 or even a 3 gang box is impossible. Thanks!

  2. #2
    Lutron Technical Support
    Join Date
    May 2022
    Good Day!

    In RA3 you can use Sunnata keypads through programming to control dimmers and their associated loads. The three-button Sunnata would have the zones associated through the programming tab of the Radio RA3 software and the raise/lower of the keypad would affect the selected loads. We hope this helps!

Similar Threads

  1. Synchronize virtual keypad with physical keypad
    By techniquesmethodes in forum Programming - HWQS
    Replies: 1
    Last Post: 07-06-2019, 11:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts