RA 3 Keypad

[aamsler]

I want to use the RA 3 keypad, 3 button with up and down, as a "companion" dimmer switch controlling three separate loads. Each of these loads are switched with an RA 3 dimmer ( RRST-PRO-N). Space is tight and adding a 4 or even a 3 gang box is impossible. Thanks!

[Freddy G.]

Good Day!

In RA3 you can use Sunnata keypads through programming to control dimmers and their associated loads. The three-button Sunnata would have the zones associated through the programming tab of the Radio RA3 software and the raise/lower of the keypad would affect the selected loads. We hope this helps!