Thanks Thanks:  0
Likes Likes:  1
Results 1 to 2 of 2

Thread: RA 3 Keypad

  1. #1
    Junior Member
    Join Date
    Nov 2018
    Posts
    4

    RA 3 Keypad

    I want to use the RA 3 keypad, 3 button with up and down, as a "companion" dimmer switch controlling three separate loads. Each of these loads are switched with an RA 3 dimmer ( RRST-PRO-N). Space is tight and adding a 4 or even a 3 gang box is impossible. Thanks!

  2. #2
    Junior Member
    Join Date
    Dec 2022
    Posts
    25
    Hello,

    In the Designer software you can program the keypad buttons to the respective RRST-PRO-N. Button 1 to dimmer 1, button 2 to dimmer 2, and button 3 to dimmer 3. The raise and lower would control the last pressed button.

  3. Likes customelectric liked this post

Similar Threads

  1. Synchronize virtual keypad with physical keypad
    By techniquesmethodes in forum Programming - HWQS
    Replies: 1
    Last Post: 07-06-2019, 11:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •