-
RA 3 Keypad
I want to use the RA 3 keypad, 3 button with up and down, as a "companion" dimmer switch controlling three separate loads. Each of these loads are switched with an RA 3 dimmer ( RRST-PRO-N). Space is tight and adding a 4 or even a 3 gang box is impossible. Thanks!
-
Hello,
In the Designer software you can program the keypad buttons to the respective RRST-PRO-N. Button 1 to dimmer 1, button 2 to dimmer 2, and button 3 to dimmer 3. The raise and lower would control the last pressed button.
-
Post Thanks / Like - 0 Thanks, 1 Likes