Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: RA 3 Keypad

  1. #1
    Junior Member
    Join Date
    Nov 2018
    Posts
    2

    RA 3 Keypad

    I want to use the RA 3 keypad, 3 button with up and down, as a "companion" dimmer switch controlling three separate loads. Each of these loads are switched with an RA 3 dimmer ( RRST-PRO-N). Space is tight and adding a 4 or even a 3 gang box is impossible. Thanks!

  2. #2
    Hello,

    In the Designer software you can program the keypad buttons to the respective RRST-PRO-N. Button 1 to dimmer 1, button 2 to dimmer 2, and button 3 to dimmer 3. The raise and lower would control the last pressed button.

Similar Threads

  1. Synchronize virtual keypad with physical keypad
    By techniquesmethodes in forum Programming - HWQS
    Replies: 1
    Last Post: 07-06-2019, 12:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •