Hi Everyone,
I would like to thank anyone that lends advice in advance as this is the first time using Caseta switch and I'm a little lost!
I'm trying to wire a Caseta(PD-5ANS) in a 3 way configuration but the wiring diagram provided on Lutrons site and help videos have me a little confused and lost.
I have 14/3 wire coming into there box(Black, White, Red, and Ground), the white wire on the 14/3 wire was connected to the different color screw so I tagged as described in the online help. I did try wiring the switch in however I left the blue wire off the back of the switch disconnected and wired it as follows:
14/3 Wire - Caseta Switch
White - Black
Red - Red
Ground - Green
Black - White
In this configuration the green led on the switch would light up, but the lights its controlling won't turn on. I did try switching it so white went to white, and black went to black this gave me the same results. I'm assuming all 5 wires off the back of the switch need to be hooked up to get control but I'm at a loss.
Also if anyone knows if you can use the Caseta(PD-5ANS) in both locations to control the light?
Again thanks in advance for taking the time to lend advice!