Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Telnet to control LED Brightness of dimmers or switch

  1. #1

    Telnet to control LED Brightness of dimmers or switch

    Many dimmers and switch have LED indicators that could be very bright at night, even at low settings.
    In bedroom at night, it might look like a Christmas tree when there are 4 dimmers/switch. Not very convenient to disconnect the dimmer with the FASS (Front Accessible Service Switch) every night.

    For example the Grafik T switch and dimmers only have the settings Low and High on local or through RA2 configuration.
    https://assets.lutron.com/a/documents/048534a.pdf

    Is there a setting Off or to a much lower setting that we can send with a specific telnet action?
    I don't find it in the integration manual:
    https://assets.lutron.com/a/documents/040249.pdf

    What about editing the driver for specific units, anyone have tried that? Since RA2 is dead, all these customers with non supported devices (like Grafik T) will be left out of option or are feature request in RA2 software still being considered?

    Many thanks in advance.

  2. #2
    Hello, I can understand how the LED indicator lights can be a distraction or a bother when people are trying to sleep, however the only settings for the Grafik T dimmer as you stated are low and high. If you want further information or clarification please reach out to support@lutron.com or call 1-888-Lutron1(588-7661)

    Have a great day!

Similar Threads

  1. 2 dimmers + fan control intermittent failure
    By trasko in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 08-12-2021, 10:50 AM
  2. Can one Pico control two dimmers separately?
    By bobc02 in forum General Discussion - CAS
    Replies: 19
    Last Post: 08-29-2020, 08:25 PM
  3. Separate dimmers control both lights.
    By SJudge in forum Troubleshooting - Controls
    Replies: 3
    Last Post: 10-05-2018, 12:30 PM
  4. Replies: 3
    Last Post: 11-09-2016, 10:51 AM
  5. Mastro fan and light control will not hold full brightness
    By cleaner in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 03-18-2014, 06:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •