Setting motion sensor timeout to 1 minute

[dotMorten]

I have the PD-OSENS-WH occupancy/vacancy motion sensor.

The included instruction sheet says you can set the timeout to be 1, 5, 15 or 30 minutes.
However on the back of the device you can only select 5, 15, and 30 minutes.
How do I set it to 1 minute timeout? Nothing in the instructions says how to accomplish this.

[Jonathan K.]

Hello,

To program a sensor for a 1-minute timeout, follow the steps below:
1. Press and hold the timeout button for 10 seconds until all3 LED indictor lights begin flashing rapidly.
2. Press and hold the timeout button until all 3 LED indictor lights turn on solid,indicating the 1-minute timeout has been saved.

For future reference, these steps, and additional sensor programming options, can be found at casetawireless.com/sensorfeatures.

[dotMorten]

Hello,

For future reference, these steps, and additional sensor programming options, can be found at casetawireless.com/sensorfeatures.

Thanks! I tried finding this but obviously failed. It's a little weird to me the instructions say you can set 1minute but then doesn't say how. (it doesn't even list how you can set the different settings, unless you are able to make out the almost ineligible text on the back of the sensor)