RA2 Under Cabinet Lights

[buyout]

I have a RA2 system. I'm curious what dimmable light strips and controllers worked in your under cabinet installs.

There are so many to choose from high end and cheap ones.

[Bill13]

I have a RA2 system. I'm curious what dimmable light strips and controllers worked in your under cabinet installs.

There are so many to choose from high end and cheap ones.

I have had very good results with WAC Lighting tape light which we usually install at the front of the cabinet with the standard aluminum channel. If the tape needs to be placed at the back then we use the angled channel. Use the RRD-PRO dimmer on reverse phase. In cabinet is usually the Pro in 3000K, under cabinet - Pro 2 in 3000K

[buyout]

I'm new to this so I don't know much of anything.

With the WAC lighting tape would I need a transformer or driver other than the RRD-PRO?

[Bill13]

You would need aLED driver to power the tape light. If you click the spec sheet once you are on the page of the tape light you want it will show all the accessories.

[bellabrownbe]

The UCA LED Under Cabinet Lighting Series features a compact design, with an ultra slim profile barely visible under the valence of kitchen cabinets.
kick the buddy online

[customelectric]

Ive successfully dimmed drivers from flexfire LEDs they are Zurik drivres. Have a soft one soft off fade without a dimmer as well