Hi all,
I have a Cartell driveway system that triggers a driveway lighting scene via its output relay that goes to the inputs on the back of an HQWD-W6BRL. That works fine. Now I want to also use the same relay output to also trigger a chime on my Yamaha musicCast system. When I just connect the trigger wire to both the Lutron unit and the musicCast system, it triggers the chime and programmed scene once, but then does not reset. Either system (Lutron or musicCast) when hooked up alone resets just fine and can retrigger. Any suggestions how to solve? It seems like maybe there is the need for some resistor in the circuit somewhere to help that retrigger. Any help or advice is appreciated!
-Darrell