-
Maestro wire connections.
The Maestro motion censor has ground, 2 blacks, 1 green sleeved white.
Coming out of the wall is ground, 2 backs, 1 red.
Connecting the white to the red does not work.
The light comes on but stays on. Will not go off. And I cannot program it.
Any ideas what wire combination might work?
-
Would you be able to confirm which motion sensor you are using? It sounds like you are using the MS-OPS2. Also, would you be able to confirm if this is a single-pole or 3-way application? The two black wires and a red wire in your wall makes it sound like it's a 3-way setup. If this is a 3-way, you will need to use the MS-OPS5m.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes