Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: PD-6WCL Dimmer

  1. #1
    Junior Member
    Join Date
    Sep 2022

    Unhappy PD-6WCL Dimmer

    I have many PD-6Wcl dimmer throughout my house and they work great. Where I'm having an issue is where I have "screw' light bulbs.

    I am using Banord model #BN003 dimmable LED light bulbs (E26 base), and I guessing they do not draw enough power for the dimmers to work.?.

    Can anyone help point out a medium sized clear dimmable light bulb for this application.?

    I am looking thru the tool, but it is quite cumbersome going back & forth between web-sites and backing in/out of search pages.



  2. #2
    Lutron Technical Support
    Join Date
    Mar 2022
    You have two options. Option 1: Use bulbs from the compatibility site at Upon doing a brief search on the tool, these GE bulbs are similarly sized to your current bulbs and only use 4W a piece. They have been tested to be fully compatible with the PD-6WCL. You can use up to 37 bulbs on a single dimmer without overloading it. Option 2: replace one of the LED bulbs with an incandescent or halogen bulb to help the LEDs out. It should stabilize the circuit and act as a sort of filter for any line noise or impurities in the sine wave.

  3. #3
    Senior Member
    Join Date
    Oct 2013
    I've had pretty good luck with EcoSmart, the Home Depot store brand.
    Convergence Technologies Raleigh, North Carolina

Similar Threads

  1. PD 6WCL dimmer still too bright
    By Ciscotech in forum General Discussion - CAS
    Replies: 2
    Last Post: 08-19-2022, 11:16 AM
  2. pd-6wcl Dimmer doesn't work
    By ijourneaux in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 01-18-2021, 01:26 AM
  3. PD-6WCL Dimmer Buzzing While Turned Off
    By tylerj714 in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 03-21-2020, 08:36 AM
  4. 6WCL disabling Dimmer
    By Andy0o0o in forum General Discussion - CAS
    Replies: 1
    Last Post: 11-26-2019, 06:34 PM
  5. Caseta Dimmer PD-6WCL Not responding
    By NYUES in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 04-12-2019, 01:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts