The system I am looking to upgrade has 28 RPM's(90% white label), 45 Vario Keypads, 22 fan controls, 26 dimmers, and 8 switches.
We put a proposal together for this client late 2019 and anticipated using QS incase the client wanted to hold off on upgrading the RPM's. This revision of the proposal will no longer give them the option use the existing RPM's.
Since we will be upgrading all of the KP's, dimmers, switches, and RPM's would there be any reason to stick with QS? I understand the PNL-8's would require din rails to be installed which is not Lutron's preference. Unfortunately 2 of the PNL-8's are installed in small nooks behind faux cabinet doors and would create quite a mess to retrofit the DIN rail models.
Would you recommend we upgrade the PNL-8's and use the new DIN modules with QSX?
I've been in a sales roll for a couple years so I'm a bit out of the loop in regards to QSX.