Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Cutted cables

  1. #1
    Junior Member
    Join Date
    Jun 2022
    Posts
    1

    Cutted cables

    Hello, all. By mistake I cutted the cables of my PD-6WCL. I would like to know if the unit can be disasamble to replace the old or put some news.

    THanks

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,357
    I don't believe so. They are not intended to be field serviceable. If there is any wire left you could try using butt splices or some old fashioned solder and heat shrink.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Senior Member
    Join Date
    Dec 2013
    Posts
    489
    If you have to ask then the answer is probably no! There MIGHT be a way to solder new leads if you can open it and close it but keep in mind that you will remove the UL listing from the device if you do that and if you get hurt or burn your house down later, you'd be on your own.

  4. #4
    Junior Member
    Join Date
    Sep 2021
    Posts
    19
    Quote Originally Posted by miguelb2029 View Post
    Hello, all. By mistake I cutted the cables of my PD-6WCL. I would like to know if the unit can be disasamble to replace the old or put some news.

    THanks
    We're sorry to hear about your PD-6WCL. Unfortunately, Lutron cannot recommend re-soldering any connections or opening up the control as it would void any warranty and the UL listing. If the wire was cut too short to create a jumper connection, we would recommend purchasing a new dimmer.

Similar Threads

  1. NVP - Nominal Velocity of Propagation for Lutron cables
    By ekimla in forum Troubleshooting - Quantum
    Replies: 2
    Last Post: 11-06-2020, 08:49 AM
  2. Control & Signal Cables
    By Hafele in forum Compatibility - LED
    Replies: 1
    Last Post: 07-20-2018, 08:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •