Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: GrafikRA RA-GRX-4 flashing after power surge

  1. #1
    Junior Member
    Join Date
    May 2020
    Posts
    3

    GrafikRA RA-GRX-4 flashing after power surge

    I have a RadioRA2 system and this morning there was a power surge (outside the house for sure since i heard a corresponding noise from the construction up the road).
    I have a whole house power surge protector but since I saw the lights brighten during the surge i suspect they aren't 100% effective.

    Immediately after the surge all the loads on the GrafikRA started flashing.
    Turning all loads off and on -- no change. Still flashing.
    Turned breaker off for 60s -- no change.
    There are LED and Incandescent loads so i tried one zone with only incandescents and it still flickers even full on. it flashes really badly when dimming.

    Anyone know what else I can try? If it is toast any idea what my options are to replace it?

    Thanks!

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    That version of the Grafik Eye does not have a flash function built-in. If it has any low-voltage devices connected, try disconnecting them. You can also try power cycling the main repeater.

    There are used ones on eBay. There are a lot of Grafik Eyes with similar part numbers. I'd have the seller send a pic with the cover off so you can see the model number. The covers are interchangeable and they take paint pretty well.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. Power Outage - Flashing Lights
    By planitadvertising in forum Troubleshooting - Legacy Other
    Replies: 1
    Last Post: 11-19-2019, 10:31 AM
  2. QSNE-4A-D Power LED Flashing
    By williamwu in forum Troubleshooting - General Commercial
    Replies: 0
    Last Post: 06-26-2017, 04:02 AM
  3. Lights surge/dim at random times
    By brittrice in forum Troubleshooting - Quantum
    Replies: 0
    Last Post: 06-07-2017, 09:59 AM
  4. HWI-PM-d48-120 Power surge damage-
    By cartnj in forum Troubleshooting - Legacy HW
    Replies: 7
    Last Post: 04-04-2017, 10:47 AM
  5. LQSE 4A-D Power LED flashing
    By MarcusViberg in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 09-08-2014, 10:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •