Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Do I need to use 3 separate dimmers on Metalux metalux 24gpt75cf led panels.

  1. #1
    Junior Member
    Join Date
    Mar 2022
    Posts
    1

    Do I need to use 3 separate dimmers on Metalux metalux 24gpt75cf led panels.

    Installing 3 led panels each rated at 54 watts. Can I control/dim all 3 with one dimmer.
    Metalux recommended m/n DVTV or DVSCTV and 18 guage low voltage wire for the dimming circuit.
    NOt sure if the dimming circuit can handle all three. Also woiuld 18 guage doorbell wire work.
    Thanx for help/

  2. #2
    Lutron Technical Support
    Join Date
    Jan 2022
    Posts
    139
    Hello,

    In order to switch and dim the LED panels the DVTV/DVSCTV would require a compatible Power Pack relay module (PP-DV) as the DVTV has only low voltage connections so it must be used with a power pack to turn on/off the fixture's line voltage.

    A simpler solution would be either the DVSTV which is rated for 8A switching and 50mA of 0-10Vcontrol or the DVSTV-453P which is rated at 450W switching and 50mA of 0-10Vcontrol. These dimmers do not require a Power Pack to switch the load as they connect directly to the line voltage to switch it on/off.

    Concerning best wiring practices for 0-10V. Please refer to Lutron's application note located here: https://www.lutron.com/TechnicalDocu...048587_Web.pdf

Similar Threads

  1. DIN Panels with beakers or without.
    By krassyg in forum General Discussion - HWQS
    Replies: 1
    Last Post: 05-05-2021, 11:20 AM
  2. Which Caseta switches will work with Metalux SLSTP fixtures?
    By asgallant in forum Design Assistance - CAS
    Replies: 2
    Last Post: 12-01-2020, 12:42 AM
  3. Replies: 2
    Last Post: 04-21-2020, 11:42 PM
  4. DIN Breaker Panels
    By BradKas in forum General Discussion - HWQS
    Replies: 0
    Last Post: 03-08-2019, 11:27 AM
  5. Separate dimmers control both lights.
    By SJudge in forum Troubleshooting - Controls
    Replies: 3
    Last Post: 10-05-2018, 11:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •