Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Lutron PD-OSENS-WH - Caseta Wireless Motion Sensor Occupancy/Vacancy

  1. #1

    Lutron PD-OSENS-WH - Caseta Wireless Motion Sensor Occupancy/Vacancy

    I have a Lutron PD-OSENS-WH - Caseta Wireless Motion Sensor Occupancy/Vacancy in my home office about 7 feet from where i sit at my desk. Nothing is obstructing view of the sensor, but if i am typing and not moving alot the light will go off. Is there is a setting to fix this or do I need to get a different product?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    There is a sensitivity setting which is set to "low" by default. The link below has directions on how to adjust the settings.


    www.casetawireless.com/sensorfeatures
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Ok so what should I change it to?

  4. #4
    Lutron Technical Support
    Join Date
    Jan 2022
    Posts
    139

    Lutron PD-OSENS-WH - Caseta Wireless Motion Sensor Occupancy/Vacancy

    Quote Originally Posted by Squill View Post
    Ok so what should I change it to?
    Low Activity is the most sensitive setting for the PD-OSENS. Unfortunately, there isn't another programming option to increase the sensitivity of the sensor. One option is to increase the timeout period so that the sensor keeps the lights on longer giving it additional time to detect motion. The default setting is 15 minutes, you can try increasing this to 30 minutes.

    If you are using a Caseta Smart Bridge, with the Lutron App, you can program the sensor for Active Hours for Occupancy/Vacancy thereby preventing the sensor from timing out during specific times of the day.

Similar Threads

  1. Occupancy sensor sensitivity and vacancy delay
    By uscpsycho in forum General Discussion - RA2
    Replies: 5
    Last Post: 01-22-2021, 03:03 PM
  2. How to use my caseta lutron with a motion sensor ?
    By atraxi in forum General Discussion - Controls
    Replies: 1
    Last Post: 09-06-2019, 02:25 PM
  3. Lutron Caseta motion sensor lights
    By Squill in forum General Discussion - CAS
    Replies: 23
    Last Post: 05-08-2018, 10:12 AM
  4. Pico Compatible with any vacancy or occupancy sensor switch?
    By Felipe in forum Design Assistance - Controls
    Replies: 1
    Last Post: 09-26-2016, 02:16 PM
  5. Wireless Motion Sensor Caseta
    By ucs308 in forum General Discussion - CAS
    Replies: 2
    Last Post: 09-17-2016, 03:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •