Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Caseta PD-6ANS-WH won't turn on

  1. #1
    Junior Member
    Join Date
    Mar 2016
    Posts
    8

    Caseta PD-6ANS-WH won't turn on

    I have had the Caseta PD-6ANS-WH switch installed for years and it has worked flawlessly up until recently. It now looks like it is working (at the switch and from the app) but it doesn't turn on the lights. If I turn on the switch and then pull out the FASS and push it back in slowly, I can get the lights to turn on. If I turn the switch off, the lights go off but when I attempt to turn it back on, the lights won't go on unless I pull out and slide the FASS back in.

    Should I go through a reset or do people think this switch is shot? Thanks in advance?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    I'd say the switch is shot. The FASS is a mechanical cut off. It essentially reboots the device. If you are having to reboot it every time, I'd replace it. You can try resetting but I don't think that will work.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. Replies: 7
    Last Post: 01-18-2021, 12:10 PM
  2. Caseta Switch PD-6ANS - Phillips LED Tape flicker / flash when off
    By pdfulmer in forum Troubleshooting - CAS
    Replies: 7
    Last Post: 12-25-2020, 02:23 PM
  3. PD-6ANS LED light doesn’t turn off completely
    By Podlasek in forum Troubleshooting - CAS
    Replies: 11
    Last Post: 12-15-2020, 09:07 PM
  4. LED doesn't completely turn off with PD-6ANS-WH and LUT-MLC
    By whitedo1 in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 08-08-2019, 08:31 AM
  5. PD-6ANS and PD-6WCL not Adding to Caseta via App
    By TXK-John in forum Troubleshooting - CAS
    Replies: 6
    Last Post: 04-13-2018, 09:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •