I recently installed a PD-6ANS for the light switch on my patio.
In the box where I was replacing the switch there were 3 sets of 14/2 coming out. I did not tag the lines and that is my fault, but when trying to connect I am assuming that all 3 black wires must be connected in some fashion to the 2 blacks on the switch.
I tried several configurations to get the switch to have the green indicator light but only one configuration worked. I have 2 of the lines going to the bottom black and one to the top.
This configuration allowed the switch to work however now I am having an issues with other switches on the same circuit (not 3-way). The other switches in the circuit will only work if the patio light is turned on.
Any advice on how to wire with the 3 14/2 wires?