Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Stay with Caseta or more to a "dealer" solution

  1. #1
    Junior Member
    Join Date
    Dec 2021
    Posts
    1

    Stay with Caseta or more to a "dealer" solution

    I am in the framing stage of a new home quickly getting close to the electrical stage. I have installed Caseta fan and lighting switches in my current home which I really like. I will be running the low voltage in my new home; network & audio. I plan to run 18/2 to power 5 Serena shades. I planned to have these shades plug into 110 at the top of some closet of my new ranch home through 5 separate wall warts. This seemed to be the most cost effective way to get powered shades.

    Should I consider one of these dealer solutions that also contain the signal communication wires with the power? The pricing seems to go from <$3K do it myself to
    $8K done by dealer for 5 windows.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    I'd run the 4-conductor wire. It doesn't cost much more and gives you more flexibility. I'd also run a Cat-6. Lutron doesn't use it but it gives you flexibility and options.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. "TRANSFER" resets all occupancy sensors to "Enabled"
    By joshg in forum Programming - RA2
    Replies: 1
    Last Post: 11-07-2022, 08:21 AM
  2. Connect Bridge goes from "Good" status to "Not Discovered"
    By jaysherwood in forum Troubleshooting - HWQS
    Replies: 6
    Last Post: 06-27-2021, 09:27 PM
  3. Replies: 4
    Last Post: 09-15-2020, 01:33 PM
  4. Bathroom lights to "night level" with Caseta Dimmer?
    By warder in forum General Discussion - CAS
    Replies: 3
    Last Post: 03-29-2019, 03:33 PM
  5. "Sivoia QS" versus "QED QS" & extending existing system
    By jfmartin in forum General Discussion - Shades
    Replies: 4
    Last Post: 09-27-2018, 07:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •