Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Sequence to finish on previous lighting level?

  1. #1

    Sequence to finish on previous lighting level?

    Is it possible to create a scene where the lights return to existing light level prior to initiating a sequence? i.e. driveway trigger starts a sequence in which a group of Ketra lights begin to flash blue for 10 seconds. After that 10 second sequence, the lights will return to the previous light setting?

  2. #2
    I'm guessing I will have to set a variable with a button press and if that variable is in the on state it would return to the original button press level. I'm guessing I can't have it go to a dimmed level if they dimmed the load(s) after turning the light(s) on.

  3. #3
    Lutron Technical Support
    Join Date
    Jul 2021
    Posts
    25
    Thank you for your post, drewski300.

    We recommend emailing hwsupport@lutron.com with the project file and the requested programming to see if it is feasible.

  4. #4
    We were able to make something work but it's not perfect. Thanks

Similar Threads

  1. Designer Style satin finish BISCUit color controls -- a few questions
    By Ed L. in forum Design Assistance - Controls
    Replies: 3
    Last Post: 11-22-2021, 10:51 AM
  2. seeTouch Keypad programming - Dimmer Level = Last Level
    By GoFast in forum Programming - RA2
    Replies: 1
    Last Post: 08-30-2021, 09:55 AM
  3. Maestro: configure on-level? time-of-day/light-level?
    By Lindahl in forum Programming - RA2
    Replies: 2
    Last Post: 03-10-2019, 07:45 PM
  4. Need Assistance to Finish RR2 System
    By peter thierry in forum Design Assistance - RA2
    Replies: 3
    Last Post: 08-22-2017, 04:33 PM
  5. Transfer is take too long to finish
    By stevi in forum Troubleshooting - HWQS
    Replies: 12
    Last Post: 01-17-2014, 08:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •