Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Programming a resetting timer for a motion detector

  1. #1

    Programming a resetting timer for a motion detector

    We using Visonic Spy1 motions to trigger actions using the IO module. I've created an event that if the motion is triggered, turn lights on, delay 5 min, turn lights off. This is done through the device programming only (no variables). Is there a way to make that timer resettable?

    Currently the lights will turn off even if I just passed by. I basically I'm looking to reset that timer so they will always be 5 min from the last motion event, not the first.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,325
    I think... if you create an automatic sequence and use the CCI to trigger the sequence it will work. You will need to select "Sequence Start/Next" for the sequence command. Basically, every time there is motion it will restart the sequence.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Quote Originally Posted by randyc View Post
    I think... if you create an automatic sequence and use the CCI to trigger the sequence it will work. You will need to select "Sequence Start/Next" for the sequence command. Basically, every time there is motion it will restart the sequence.
    I'll give that a shot! Thanks for the tip

Similar Threads

  1. Motion detector
    By Polkster13 in forum General Discussion - CAS
    Replies: 2
    Last Post: 08-29-2020, 08:30 AM
  2. Casita new wireless motion detector with Caseta dimmer question
    By Kevo999 in forum General Discussion - CAS
    Replies: 2
    Last Post: 02-20-2020, 11:25 PM
  3. Timer switch paired with remote motion sensor
    By Lukeetal in forum Design Assistance - Controls
    Replies: 1
    Last Post: 09-27-2016, 08:55 PM
  4. Exhaust Fan Timer Programming
    By Matt@ADG in forum Programming - HWQS
    Replies: 2
    Last Post: 06-02-2015, 10:09 AM
  5. Programming Automatic reboot on timer
    By Barbara Barrow in forum 3rd-party Integration - HWQS
    Replies: 2
    Last Post: 07-21-2014, 01:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •