Hello,
I installed a Caseta Dimmer with a pico remote so that I can add three way functionality to my lights without running a new wire. There is a switch loop running off of the hardwired switch, so I cannot run a new wire without having box fill issues.
The dimmer and remote function, but there is an audible buzz coming from the bulbs themselves once the switch was installed. I do not want to replace the bulbs, because they are extra bright LED corn bulbs for my garage. This buzz did not occur with the switch hardwired in.
I cannot find any bulb compatibility list for the basic switch, such as the 6ANS. If I install one of those, will this eliminate any buzz?