Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: S2-LFSQ and LED lights

  1. #1
    Junior Member
    Join Date
    Oct 2021

    Lightbulb S2-LFSQ and LED lights

    Why is this fan/light control switch not recommended for LED bulbs? The light portion of the switch is just on/off, not dimming.

  2. #2
    Junior Member
    Join Date
    Oct 2021
    Sorry, I used the wrong part number - I meant SFSQ-LF.

  3. #3
    The S2-LFSQ was tested/rated for up to 300watts incandescent/halogen only for the light portion. While technically you could have an LED load connected to the control and work properly for a time, the control was only rated for incandescent/halogen and over time the inrush current of the LED could impact/damage the control. We'd recommend to use it only with incandescent/halogen as it was tested/rated to be used with. If you have any other questions our tech support team is available anytime, 24/7 at (1-888-588-7661) and

Similar Threads

  1. How does RA2 connect to things like patio lights, garden lights, xmas etc?
    By psychobunny in forum General Discussion - RA2
    Replies: 3
    Last Post: 07-31-2018, 12:29 PM
  2. Skylark S@-LFSQ Fan Control / Dimmer Troubleshooting
    By Ydnar in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 06-14-2018, 09:25 PM
  3. Replies: 3
    Last Post: 06-12-2017, 10:43 AM
  4. Replies: 1
    Last Post: 07-26-2016, 10:19 AM
  5. Raise Lower DMX RGB Lights and Incandescent Lights
    By Armando B. in forum Programming - HWQS
    Replies: 3
    Last Post: 11-12-2014, 12:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts