Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Cassetta 3 way and multiple occupancy/motion sensors

  1. #1
    Junior Member
    Join Date
    Nov 2020
    Posts
    1

    Cassetta 3 way and multiple occupancy/motion sensors

    Is this possible?
    Cassetta switches in a 3 or 4 way switch config. with two wireless motion/occupancy sensors.

    Use:
    Entranceway stairs leading to a hallway with a 90 degree turn at top of stairs, then 15' of hallway to another set of stairs (these are parallel to the hallway direction)
    Switches: One at entrance way, one at top of second stairway, and a third (possibly) at an intermediary point between.

    Thanks in advance

  2. #2
    Lutron Technical Support
    Join Date
    Aug 2019
    Posts
    182
    You would need to use the PD-OSENS-WH Caseta sensors and then Pico remotes in the other switch locations https://forums.lutron.com/showthread.php/17050-Cassetta-3-way-and-multiple-occupancy-motion-sensors.

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    I'm not sure about Caseta but in Lutron's other systems, if you place both motion sensors in the same room they will respond together. For example, the last sensor to see motion will determine the timeout.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. multiple occupancy sensors controlling a single load
    By dogman in forum General Discussion - RA2
    Replies: 1
    Last Post: 04-01-2021, 03:22 PM
  2. Vacancy sensors behaving like occupancy sensors
    By joeostie in forum Troubleshooting - CAS
    Replies: 7
    Last Post: 11-01-2020, 01:29 PM
  3. Two motion sensors to one switch help
    By Carloscbj89 in forum General Discussion - Controls
    Replies: 1
    Last Post: 08-21-2020, 09:57 PM
  4. Multiple Occupancy Sensors in Different Rooms Controlling one Load
    By johngalt in forum General Discussion - RA2
    Replies: 1
    Last Post: 06-15-2017, 01:32 PM
  5. QSE-IO and 3rd-party occupancy (motion detection) sensors
    By virtual in forum Design Assistance - HWQS
    Replies: 1
    Last Post: 09-30-2014, 02:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •