We are about to undergo a large reno on a 20+ year old home. I’m a network/server/tech nerd and not scared to get my hands dirty on the config/management side of things. Most importantly I want full homeowner control over my lighting/shade system config and management. I want to get away from a single propriety system so I don’t want systems like Control4, Savant, Elan, etc. (I'm very familiar with Control4) After a lot of research I think Lutron RA2 Select makes sense for lighting/shades in my reno retrofit. I’m not personally going to be wiring the inline dimmers or performing any electrical work myself. My contractor will be using subs. That said I have a couple questions. Admittedly the questions over lap a bit: 1. I would like to hire someone or a company to give me advice on thinks like device count, Pico placement, scene thoughts and any other ideas that only come with experience setting up RA2 Select systems. (I don’t think our designer/architect is well versed enough in RA2 Select to help.) I have thought the setup through but a second pair of eyes to double-check my research and setup thoughts would be welcome. Is this "consulting-portion" performed by a home automation company, a Lutron-certified electrician or someone else? Or should the consulting portion just be part of the bidding process and ultimately whoever does the install? 2. When I get electrical bids for the rest of the project should the electrician we are using for the rest of the project be the SAME one wiring the in-line dimmers, shades and the rest of the RA2 Select gear? ...Or is this step performed after the circuits are in place and done by some sort of specialized company in RA2 Select? Much appreciated, -S