After reviewing Application Note #559 I am still wondering if I could effectively use a single HALOGEN 35W MR16 bulb with a RRD-6NA and a simple ELV 12V transformer like this: https://ltftechnology.com/ltf-ta-te-...formers/Thanks, Richard
After reviewing Application Note #559 I am still wondering if I could effectively use a single HALOGEN 35W MR16 bulb with a RRD-6NA and a simple ELV 12V transformer like this: https://ltftechnology.com/ltf-ta-te-...formers/Thanks, Richard
~~~Richard___ Santa Cruz, CA
The only way to know for sure is to test it. I believe the chances are pretty good of it working. You will probably have to bump up the low end but it should work.
Convergence Technologies Raleigh, North Carolina
www.convergenceusa.com
Thanks Randy. I just ordered a RRD-6NA from Lutron's Obsolete Products Dept for $160!
~~~Richard___ Santa Cruz, CA
I can't confirm it as your link is down, but it does work, I was initially using that setup.