Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: smart occupancy sensors with manual override?

  1. #1
    Junior Member
    Join Date
    Jul 2021
    Posts
    2

    smart occupancy sensors with manual override?

    Hi guys,I don't know if it's just me but I've been looking for some motion sensors with "permanent" manual override. I know lots of sensors have manual options to bypass detection but all temporary.Made a LOT of searches and find a sensor that do have this option. https://www.rayzeek.com/products/pir...sor-rz021-5a-n But I only need a few and want to buy on amazon, does lutron has similar sensors?I know I can wire another toggle switch to achieve similar manual control functions but it doesn't look good on my wall.Thanks.

  2. #2
    The only solution that Lutron has that has manual override functionality is covered under App Not 533 @ https://www.lutron.com/TechnicalDocu...n_Note_533.pdf. This is for commercial applications and involves the LOS hard wired sensors, hard wired Power Pak PP-DV and our Nova T momentary switches. The rest of our sensor offerrings including the Maestro and Radio Powr Savr sensors testing/rating wise cannot have the sensor functionality overridden. If you have any other questions our tech support is available anytime 24/7 @ support@lutron.com as well as via phone (1-888-588-7661).

  3. #3
    Junior Member
    Join Date
    Jul 2021
    Posts
    2
    Quote Originally Posted by Dorothy B. View Post
    The only solution that Lutron has that has manual override functionality is covered under App Not 533 @ https://www.lutron.com/TechnicalDocu...n_Note_533.pdf. This is for commercial applications and involves the LOS hard wired sensors, hard wired Power Pak PP-DV and our Nova T momentary switches. The rest of our sensor offerrings including the Maestro and Radio Powr Savr sensors testing/rating wise cannot have the sensor functionality overridden. If you have any other questions our tech support is available anytime 24/7 @ support@lutron.com as well as via phone (1-888-588-7661).
    Thanks dude, been looking at these.

Similar Threads

  1. Vacancy sensors behaving like occupancy sensors
    By joeostie in forum Troubleshooting - CAS
    Replies: 7
    Last Post: 11-01-2020, 02:29 PM
  2. Occupancy Flashes on Sensing but stays off until manual select
    By hawkiz6 in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 05-02-2018, 01:26 PM
  3. Wireless Occupancy sensors
    By inkontrol in forum Programming - HWQS
    Replies: 6
    Last Post: 04-04-2018, 08:07 PM
  4. Occupancy/vacancy sensors
    By Ekkoville in forum General Discussion - CAS
    Replies: 5
    Last Post: 04-14-2016, 02:46 PM
  5. Override Occupancy program.
    By ErionK in forum Programming - HWQS
    Replies: 5
    Last Post: 02-20-2015, 04:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •