We are integrating a Tridium BMS system with Lutron.Communication is carried out through a Crestron system that provides all the user integration.Our Des-Ops call for control of electric towel rails that are handled by the BMS.All control is operational however one aspect has me a bit flummoxed:The BMS system will run the towel rails according to a user defined timetable - generally twice a day (morning/evening)The end user also has the option to turn the towel rail on & off via the Luton keypad located outside the bathroom.When the towel rail is on the button LED should light.Now the tricky part. When the towel rail is under control from the BMS timeclock we need to slowly flash the keypad LED.Currently I can get the LED to turn on from the timeclock, but for the life of me cannot figure out if it's possible to flash it let alone a slow flash.Is this possible in the existing software?I don't see any options for controlling the LED feedback apart from the standard 'LED Logic' & 'LED Based on' functions.I realise I can create a flash input on a phantom, but ideally would like to handle this within Lutron.Cheers-s