I have a customer with two homes. Each home has a HomeWorks QS system. The two homes are connected by a VPN such that each home is on an IP subnet and the two subnets are directly connected. e.g. one subnet is 10.1.0.0/16 and the other subnet is 10.2.0.0/16. I device sitting on the 10.1 subnet can telnet directly to a device sitting on the 10.1 subnet and vice-versa.Is there a way to program controls on one HomeWorks qs system to control devices on the other? For example, programming a keypad on the 10.2 HomeWorks systems to activate an exterior light scene on the 10.1 HomeWorks system. Manually creating Ethernet integrations seems like one option. I could also put a Linux /Raspberry Pi box between the two and use Telnet. But before I go investigate thjose, is there anything that Lutron has already done that I could just turn on?Feels like something that's not too hard to manually program, but also seems like a scenario that Lutron might directly support.Thanks.