Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: CCO Pulsed Loads not showing in Connect App

  1. #1
    Junior Member
    Join Date
    Jun 2019
    Posts
    3

    CCO Pulsed Loads not showing in Connect App

    I've recently completed a HWQS project where we're using a number of Pulsed contact closure loads to perform basic functions, i.e open, close, stop commands on Velux windows, Velux Blinds, Garage doors etc. These are mainly programmed onto button presses. I've used maintained outputs quite frequently on other projects and these show up in connect. However, I've noticed that the Connect App doesn't show Pulsed contacts which is a bit gutting. Can anyone fathom why the maintained cco's are exposed to the app, but the pulsed aren't?? Is there a clever workaround (or better, a simple workaround) that I'm unware of? Thanks

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    238
    Thank you for your post anthonini.

    We do apologize for the pulsed outputs not showing up in the app. We have forward this request over to our team for future considerations. In the mean time, the simplest workaround would be to add a homeowner keypad to the database and to have the outputs on different buttons on the homeowner keypad. Have the buttons be programmed as single action and have them trigger the pulsed outputs. Hope this helps!

  3. #3
    Junior Member
    Join Date
    Feb 2021
    Posts
    5
    Quote Originally Posted by anthonini View Post
    I've recently completed a HWQS project where we're using a number of Pulsed contact closure loads to perform basic functions, i.e open, close, stop commands on Velux windows, Velux Blinds, Garage doors etc.
    Hi, may I enquire as to what you are using as an interface between the Lutron CCO's & Velux kit ?
    Many thanks!

Similar Threads

  1. Pico not showing in Connect App
    By MitchE in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 04-25-2019, 12:27 PM
  2. VCRX Output gone from Connect App once set pulsed
    By dvpvic in forum Programming - RA2
    Replies: 5
    Last Post: 05-24-2017, 09:47 AM
  3. New Lutron Connect App not showing On / Off status
    By MisterC in forum General Discussion - RA2
    Replies: 12
    Last Post: 06-28-2016, 05:00 PM
  4. RRd-6NA Not showing on Radio Ra 2 Software
    By andrebettor in forum Programming - RA2
    Replies: 2
    Last Post: 08-23-2014, 03:03 PM
  5. Tracking Scene LED Logic with Pulsed CCOs
    By Armando B. in forum Programming - HWQS
    Replies: 1
    Last Post: 05-08-2014, 12:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •