Thanks Thanks:  0
Likes Likes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Ra2 issues / system failure

  1. #11
    Junior Member
    Join Date
    Aug 2014
    Posts
    26
    I was able to determine that it is our outdoor daktroniks digital sign causing the problem. The day that this started, they pushed a firmware update to it.

  2. #12
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    It doesn't sound like you are having issues communicating with the main repeater so the network side should not be an issue.

    You tried a different repeater so I don't think it is hardware. However, I would run Tools, Update Firmware just to make sure everything is up to date.

    I would try to determine if the failures are limited to a specific area. If so, something new could be causing interference. AC's are starting to come on. They could have a new fridge (probably one of those evil LGs).

    You didn't say much about the layout. I would try adding an aux repeater.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #13
    Senior Member
    Join Date
    Oct 2013
    Posts
    518
    What model sign? Is it the sign itself making the RF noise, or does it happen to use the same RF frequencies for updates?

  4. #14
    Quote Originally Posted by Fiasco View Post
    I was able to determine that it is our outdoor daktroniks digital sign causing the problem. The day that this started, they pushed a firmware update to it.
    Are you able to communicate if the sign is off?

  5. #15
    Junior Member
    Join Date
    Aug 2014
    Posts
    26
    Yes, sign off and the lighting system worked fine.

    I had to leave town to go pick up a pinball machine and was unable to test further but I believe me resetting power to the sign after the firmware update corrected the signs RF interference problem

  6. #16
    Quote Originally Posted by Fiasco View Post
    Yes, sign off and the lighting system worked fine.I had to leave town to go pick up a pinball machine and was unable to test further but I believe me resetting power to the sign after the firmware update corrected the signs RF interference problem
    Wow. Fantastic.

  7. #17
    Junior Member
    Join Date
    Mar 2014
    Posts
    24
    Have you tried bringing your own wifi router and testing with that?

Page 2 of 2 FirstFirst 12

Similar Threads

  1. GRX 3106 failure
    By nickmarmont in forum Troubleshooting - Legacy Other
    Replies: 1
    Last Post: 03-16-2019, 09:27 AM
  2. Home + App Failure
    By inkontrol in forum Troubleshooting - Legacy HW
    Replies: 4
    Last Post: 03-03-2017, 02:04 PM
  3. ralb-5w-ao failure
    By franklin1 in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 08-08-2016, 07:49 PM
  4. Two Processor in One System but one processor failure
    By Syncon in forum General Discussion - HWQS
    Replies: 3
    Last Post: 08-01-2015, 10:08 AM
  5. Grx io failure
    By savimagc in forum Troubleshooting - Legacy Other
    Replies: 0
    Last Post: 04-13-2015, 07:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •