Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: LEAP notification speed fixable?

  1. #1
    Junior Member
    Join Date
    Nov 2020
    Posts
    1

    LEAP notification speed fixable?

    I’m working on some integrations using the LEAP api and I’ve noticed a big difference in time between the level notifications when using a pico vs the dimmer itself.

    Level changes from the pico show up immediately, makes sense as it has to send the command to actually cause a change. Using the dimmer itself is delayed a second or so, more of a after-the-fact levels have updated notification. This means my automations have a second delay on them when reacting to changes made on the actual dimmer control, even when they are instantaneous and look great when working with a pico.

    Is it even possible this could be updated to both be quick? I’m not aware of any firmware updates for Caseta dimmers so there may not even be a mechanism for distributing changes?

  2. #2
    Lutron Technical Support
    Join Date
    Apr 2021
    Posts
    10
    This is not something that can be changed at the moment. The fade rate time is set by the device

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Since the Pico isn't paired to the dimmer, the signal has to go through the bridge. It sounds like the bridge is updating the level based on the signal. I think you will find the same response if you use the app. Lutron doesn't wait for feedback from the device. It assumes the device responded properly. This is true of all Lutron systems (at least the ones I work with). I don't see Lutron making wholesale changes in the way they process feedback.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. where is the LEAP API documentation?
    By NateS in forum 3rd-party Integration - HWQS
    Replies: 6
    Last Post: 02-14-2024, 04:24 PM
  2. 4 speed Caseta Fan control has only 1 speed Full max or nothing
    By HansMC in forum Troubleshooting - CAS
    Replies: 8
    Last Post: 10-26-2023, 11:27 AM
  3. Feature request: dismiss away notification when you've already returned
    By wkearney99 in forum General Discussion - RA2
    Replies: 0
    Last Post: 05-09-2016, 07:52 AM
  4. Bus speed ?
    By mehuneau in forum General Discussion - HWQS
    Replies: 2
    Last Post: 05-09-2015, 02:15 AM
  5. Power outage notification via radio ra2
    By Mapeselec in forum 3rd-party Integration - RA2
    Replies: 2
    Last Post: 05-25-2014, 06:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •