Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Is the PJ2-2B-GWH-P01 Assignable ?

  1. #1
    Junior Member
    Join Date
    Aug 2018
    Posts
    16

    Is the PJ2-2B-GWH-P01 Assignable ?

    Want to know if the Top Button of the PJ2-2B-GWH-P01 is Assignable ? Like on the PJ2-4B-GWH-P01 / P02 / P03. Looking to ProgramALL Devices to the Bottom Button for O F FSOME Devices at various intensities to the Top Button for H O M EIs the PJ2-4B-GBL-P01 capable of doing this ?

  2. #2
    Junior Member
    Join Date
    Jan 2021
    Posts
    19
    With the PJ2-2B-GWH-P01, you should be able to configure the buttons in the app. You will tap on the Pico remote > Edit Device > select the button you want to edit > assign the devices to do what you want > repeat for the other button.

  3. #3
    Junior Member
    Join Date
    Aug 2018
    Posts
    16
    Thank You, for reaching out. I have found so much information / knowledge from the Lutron Forum. I currently have the PJ2-2B-GWH-L01, in my system, and it is NOT programmable. This particular application is for a client. I took the chance and ordered the PJ2-2B-TMN-P01, and it arrived today. I just tested it with my system and it works Perfectly. It does EXACTLY what we need it to do ! Each Button is Completely Programable. Bottom Button can take EVERY Device to OFF. Top Button can take just a FEW Devices to ANY Preset Level. Gotta Love Caseta !

Similar Threads

  1. Assignable items - timeclocks
    By ekimla in forum Programming - HWQS
    Replies: 3
    Last Post: 11-12-2013, 05:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •