Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: GRX-TVI run by RRD-6NA set to ELV/MLV/INC limit issues

  1. #1
    Junior Member
    Join Date
    Jun 2018
    Posts
    12

    GRX-TVI run by RRD-6NA set to ELV/MLV/INC limit issues

    My customer has some strange sconce lights by WAC WS-59623-AL light fixture that says it can be run via ELV or 0-10v. We tried to intially run with ELV and it wouldn't dim properly. So we ended up going fishing and installing the GRX-TVI 0-10V interface. FIxture claims it will dim 100-5%.Here is my issue, I have tired lots of things to get this series of 4 vanity lights to work to my clients satisfaction and so far it has been unsucesful. Currently Have low limit cranked to max 45% which has stopped the low end flickering but when the light switch gets manually set to 100% the light starts to flicker. Is there a way to set this top end to a lower MAX setting using the RA2 essential software. MR client uses the keypads and remotes and apps and fancy stuff 99.98% of the time, but MRS client hates technology and wants to walk in and hit the buttons all willie nilly all the time. Any Ideas

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    217
    Thank you for your post PaulHagen.

    Using the 6NA is not a problem, but we would recommend making sure the load is set to forward phase for the dimmer. This can impact how the GRX-TVI works with the dimmer. At the same time 0-10v is a standard and is not widely tested. As long as it is 0-10v it should work with the Lutron Controls. Hope this helps!

Similar Threads

  1. Crestron module has a 50 ID limit; is there one that is 70 ID ?
    By jerrywolfer in forum 3rd-party Integration - CAS
    Replies: 4
    Last Post: 10-30-2020, 03:51 PM
  2. Hubs that go beyond 50 device limit
    By plazma in forum 3rd-party Integration - CAS
    Replies: 25
    Last Post: 12-09-2019, 09:57 PM
  3. Limit Events to certain areas
    By ISaunders in forum Programming - RA2
    Replies: 1
    Last Post: 12-23-2015, 06:59 PM
  4. Triathlon / RR2 Low End Limit
    By paulhanks in forum Troubleshooting - Shades
    Replies: 5
    Last Post: 10-14-2015, 09:49 AM
  5. 30 foot device limit
    By Tazplex in forum General Discussion - CAS
    Replies: 3
    Last Post: 01-14-2015, 10:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •