Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: QS bus specification

  1. #1
    Junior Member
    Join Date
    Sep 2019
    Posts
    7

    QS bus specification

    Hi gents,Could you please confirm what are the maxim length per home run, the maximum number of PDU per home run, and the maximum length total on a QS bus, using the Lutron cable GRX-346S (0.75mm2)?On that spec p.19/23 it says 2000ft using the 4mm2 cable, but what about using the GRX-346S: https://www.lutron.com/TechnicalDocu...stem_Rules.pdf On that spec p.12, it says 2000ft max total, and 1000ft – 15PDU max per home run, but it does not say using which cable: https://www.lutron.com/TechnicalDocu...Guidelines.pdf Kind regards, Don

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    238
    Thank you for your post donafcna.

    The max about of PDUs per home run is 15. That 15 PDUs will be for any wire used on the QS link. Gauge of wire comes into account when we are dealing with Shades. For those lengths please see here https://www.lutron.com/TechnicalDocu...ry/3684280.pdf. Hope this helps!

  3. #3
    Junior Member
    Join Date
    Jul 2021
    Posts
    2
    Quote Quote
    Originally Posted by Homeworksuser I need to know the number of PDUs for the quick and custom writing of the HomeWorks QS 1-Link Processor SPEC (3691015)
    Hello, You can look at this pdf document: https://www.lutron.com/TechnicalDocu...691015_ENG.pdf Hope you find it useful.

Similar Threads

  1. Triathlon cellular headrail specification
    By PAR-Designer in forum Design Assistance - Shades
    Replies: 2
    Last Post: 03-03-2021, 04:39 AM
  2. Specification Question - To be or not to be "Vive"
    By Zitomd in forum Design Assistance - Vive
    Replies: 3
    Last Post: 10-26-2020, 04:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •