Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Activating Ballasts - Database Error

  1. #1
    Junior Member
    Join Date
    Mar 2021
    Posts
    1

    Thumbs up Activating Ballasts - Database Error

    Hi there,I'm having some issues with our Homeworks QS system. I work on an 80m+ Superyacht with QS installed throughout the vessel, the system itself is quite complicated but I have issues when replacing drivers for lighting loops with the error:'The number of activated ballasts in space and database is different' What is the workaround for this? I'm confident once I get past this phase I will be OK. I do not want to reverify every loop as we have 3 processors and around 10+ loops on board that these control. We get this error for every single processor so any unactivated ballasts cannot be activated. Many thanks in advance!

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    238
    Thank you for your post ETO-2021.

    This could be due to wiring or the amount of loads within the loop itself. How many ballasts do you have on the loop?

    We would also suggest following our Ecosystem app note for HomeWorks QS found here at https://www.lutron.com/TechnicalDocu...0in%20HWQS.pdf. If you would need more troubleshooting help, please feel free to reach out to us @ 1.844.LUTRON1 or HWSupport@lutron.com

Similar Threads

  1. Re-Assigning DALI Ballasts
    By EBlight in forum Programming - HWQS
    Replies: 2
    Last Post: 09-19-2020, 08:03 AM
  2. Getting Error during conversion of HWI to HWQS database
    By SparkyCoog in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 09-10-2019, 03:18 PM
  3. Some ballasts on the same rail are not dimming
    By Babsuntech in forum Programming - HWQS
    Replies: 2
    Last Post: 01-14-2017, 04:30 PM
  4. Inclusive Software Database Error crash
    By Lukeetal in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 11-06-2016, 09:34 AM
  5. Activating keypads- is Transfer Database actually needed?
    By johnmax in forum Programming - HWQS
    Replies: 7
    Last Post: 11-27-2015, 01:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •