Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: PD-5S-DV no longer working with garage lights

  1. #1
    Junior Member
    Join Date
    Nov 2020
    Posts
    4

    PD-5S-DV no longer working with garage lights

    I have a PD-5S-DV that had been working for some time on my garage lights but recently stopped working. The switch LED shows the off position, you try to turn it on, it "tries" (shows green for a second) then flashes red and is back to off. I suspect this is because it can't detect the load anymore. I have a LUT-MLC wired in the gang that I installed myself so I assumed that had come loose but when I pulled it apart it looked pretty good. I even re-did it and I'm still seeing the same result. Is it possible that a blown bulb can cause this. I thought that since the LUT-MLC was in parallel with the load that even bad bulbs wouldn't affect that but maybe I'm wrong? I'm trying to figure out where my issue is. Do I need new bulbs? Is it possible the LUT-MLC is no longer working as intended? The switch itself? My "wiring diagram" is the follow Wall Black -> Switch Black | Wall Black -> Switch Black and LUT-MLC | Wall White -> LUT-MLC | Wall Green (copper exposed) -> Switch Green(Switch blue unused)

  2. #2
    Senior Member
    Join Date
    Aug 2019
    Posts
    128
    If you cycle the FASS tab underneath the "OFF" button, does this then resolve the blinking pattern and clear the error on the switch? What is the total wattage of lights on the switch?

Similar Threads

  1. Replies: 7
    Last Post: 03-15-2021, 10:11 AM
  2. PD-3PCL Lamp dimmer No longer working
    By mrjonestech in forum Troubleshooting - CAS
    Replies: 2
    Last Post: 01-05-2021, 08:39 PM
  3. New garage lights not working with Caseta In-Wall Smart Dimmer
    By carpenter75 in forum Troubleshooting - CAS
    Replies: 2
    Last Post: 02-24-2020, 04:12 PM
  4. Can Garage door turn on Garage lights?
    By jlbethurem@gmail.com in forum 3rd-party Integration - CAS
    Replies: 1
    Last Post: 04-03-2019, 10:05 PM
  5. Keypads and Dimmer switches no longer working
    By deyster in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 06-08-2015, 11:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •