My application uses a PIR sensor to set a Lutron Caseta "Active" scene based on motion, then another "Idle" scene when a timer expires. Using the Lutron Integration Protocol, I'm calling the two scenes using a #DEVICE command. My goal is more gradually fade the included dimmers down/off when the "Idle" scene is called, ideally without managing individual dimmer commands.I know I can easily set a fade time for a single dimmer using an #OUTPUT command, but is it possible to call a scene and include a fade time using the #DEVICE command?Also, is there any Lutron Protocol doc that specifically lists what is/is not supported by Caseta devices? It appears a fair amount of the RA2-supported commands work, but not all. Having a clear list would be helpful.Thanks!