Originally Posted by
seanwest
Hello, as I know, the Lutron Integration Protocol does not support directly specifying a fade time when calling a scene using the #DEVICE command. The #DEVICE command is primarily used to activate or deactivate scenes, and it does not provide fine-grained control over individual dimmers or their fade times. Therefore, if you want to achieve a gradual fade for the included dimmers when the "Idle" scene is called, I think you should manage the individual dimmer commands separately. You can send a series of #OUTPUT commands to gradually fade down/off the dimmers over a specified duration. For example, you can send multiple #OUTPUT commands with decreasing light levels at regular intervals until the desired fade time is reached.