Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: 3-way switching and engraving questions

  1. #1
    Junior Member
    Join Date
    Jun 2015
    Posts
    11

    3-way switching and engraving questions

    I have a lighting system with no neutral and am considering Caseta. I had a play with the system at the weekend am so far looks really promising. 2 questions so far:1 - I have a few 3 way lighting circuits and am a little puzzled as to how to set these up. Would I use 3 x light dimmers, or 1 master and 2 x picos?2 - I want to use 2 button switches for the fans but they have light symbols on them which would be confusing. Can I get these custom engraved with a fan symbol and if so, would it still have the light symbol on it - which would be even more confusing :)

  2. #2
    Senior Member
    Join Date
    Aug 2019
    Posts
    128
    Hello. Please see the advanced install guide that will help you with these questions. https://www.casetawireless.com/Docum...ced%20Inst.pdf In a 4-way you would use 1 master and two Pico remotes. At this time there are no switches made with the Fan icon. Just lights. You may want to call customer service to see if that is an option.

  3. #3
    Junior Member
    Join Date
    Jun 2015
    Posts
    11
    Thanks, the 3/4 way is all much clearer now.Re fans. Support have confirmed that the only fan option is the 4 button fan switch. There is no 2 button fan switch and the only thing that can be engraved is the Pico and they don't have a fan icon anyway (which seems really strange)

  4. #4
    Senior Member
    Join Date
    Jan 2019
    Posts
    297
    Lutron will engrave Claro wall plates if you want them to.
    Evan Kirkhart- Home Electronics Solutions
    Santa Barbara, CA
    evan@homeelectronics.solutions

  5. #5
    Junior Member
    Join Date
    Aug 2018
    Posts
    16

    About Engraving / Icons

    Yes, Lutron has been lacking on its Icons for Caseta. Especially in the mobile App. I use the Caseta App extensively, and would Love some additions to the ICONS. I have over 30 Dimmers / Devices I am controlling currently, and am doubling up on some of the ICONS. The 37 current ICONS overlap a lot. It would be nice to have a "Picture Frame", "Lava Lamp", more LED references, X-Mas Wreath, Garland.

Similar Threads

  1. Switching to a new RA2 Programmer - Is it Difficult?
    By millim in forum General Discussion - RA2
    Replies: 4
    Last Post: 03-09-2020, 11:33 AM
  2. Switching a Receptacle using a Dimmer
    By Shandley in forum Design Assistance - RA2
    Replies: 2
    Last Post: 12-11-2018, 01:52 AM
  3. design programming for 3 way and 4 way switching
    By Sideaffect in forum Programming - RA2
    Replies: 1
    Last Post: 11-05-2018, 11:28 AM
  4. Caseta Wi-Fi switching problem
    By gbeach in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 07-10-2018, 02:49 PM
  5. Switching on 4A or 4U
    By itsthebombbee in forum Design Assistance - HWQS
    Replies: 1
    Last Post: 04-25-2014, 07:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •