Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Sequence Help

  1. #1

    Sequence Help

    From what Lutron tech support told me, a sequence can only be activated with a button press. My scenario is I have heaters that I need turn off after a set amount of time. I have it working with a sequence on a keypad press perfectly. The problem is the client goes to the app and turns the heaters on with via the load, not the keypad. So the sequence does not work, heaters stay on until he turns them off. So my question is, can you start a sequence when the load turns on, not a keypad press? So instead of the sequence being triggered by a keypad press, it is triggered by a load turning on?Thanks in advance for your input

  2. #2
    Senior Member
    Join Date
    Sep 2014
    Posts
    132
    I dont see a way for you to latch onto the status of a load in QS. It would be nice to be able to act off of a load status. I mean if you had another control system you were talking to like Crestron this wouldnt be too hard- Since you can monitor the status of a load on that side you could see when it comes on, and then basically shut them off after your timeout period within that program, or you could even retrigger your Lutron sequence button by sending the press back over from the Crestron side which would press your Lutron sequence keypad press.

Similar Threads

  1. Automatic Sequence
    By Surlyduff11 in forum Programming - HWQS
    Replies: 2
    Last Post: 12-04-2020, 10:41 AM
  2. Blink LED during sequence
    By gbagley in forum Programming - HWQS
    Replies: 3
    Last Post: 01-02-2020, 07:47 AM
  3. Sequence Trouble
    By TurnipTruck in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 01-11-2016, 06:37 AM
  4. Automatic sequence issue
    By Ironmike in forum Programming - HWQS
    Replies: 1
    Last Post: 04-28-2014, 02:19 PM
  5. Automatic Off Sequence
    By Kevin P. in forum Programming - HWQS
    Replies: 6
    Last Post: 01-28-2014, 03:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •