I have a bath room with two doors and switches at both doors. Only one switch controls the overhead light (1 way). The other switch used to control an outside light in a 3 way configuration. It no longer does. I would like to find a solution to make that switch act as a 3 way with out the wire to control the over head light. The slave switch would use RF to communicate with the main switch. There is power in the single gang slave box. If the solution is battery powered I am ok with that. Can I use two Lutron PD-5S-D to do this? This would work but it no longer exists. https://www.amazon.com/Leviton-Anywh.../dp/B00004YUOL Does Lutron make something like that?